Factory Supply Crypto Mining Simulator - New Bitmain Miner PSU APW7 Antminer APW7 – KaLe

Short Description:

Product Detail

Product Tags

Feedback (2)

We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Goldshell Lb1, 3080 Hashrate, s19j pro, "Passion, Honesty, Sound services, Keen cooperation and Development" are our goals. We've been here expecting close friends all around the earth!

Factory Supply Crypto Mining Simulator - New Bitmain Miner PSU APW7 Antminer APW7 – KaLe Detail:

Specifications

Output	DC Voltage	12.0 V
	Rated Current (200 – 240 V input)	150 A
	Rated Power (200 – 240 V input)	1800 W
	Rated Current (100 – 140 V input)	67 A
	Rated Power (100-140 V input)	800 W
	Ripple & Noise	< 1%
	Voltage Regulation	< 2%
	Source Regulation	< 1%
	Load Regulation	< 1%
	Setup, Rise Time	< 2 S
	Power off Protection Trip Time	> 10 mS
Input	Voltage Range	100-140 V A/C200-240 V A/C
	Frequency Range	50 – 60 Hz
	Power Factor	> 0.99 (full load)
	Leakage Current	< 1.5 mA 220 V 50 Hz)
Protection	Low-voltage Input	80 – 89 V A/C
	Output Short Circuit	Yes
	Output Overcurrent	100 – 200 A
	Overheat Protection	Yes
Environment	Operating Temperature	-20°C – 50°C
	Operating Humidity	20% – 90% relative humidity (non-condensing)
	Altitude	< 2000 m
Structure	Dimensions	220 x 108 x 62 mm
	Weight	2.0 KG
Cooling	Fan	Forced-air cooling
	Noise	43 dB

Compared to APW3++, the rated power of APW7 has increased by 200 W. And we can understand from the below APW7 Efficiency Curve diagram that its efficiency is 95% which increased 1.5%.

APW7 (4)

Evaluation

We are using APW7 to run the X3 Antminer (which its rated Power is 500 W). We see that the power consumption of 490.8 W (on the left picture), so the load percentage is 490.8/1800 = 27.27%
Whereas using APW3++ to run X3 miner has a power consumption of 498.2 W (on the right picture), so the load percentage 498.2/1600=31.14%
We can conclude that APW7 could save around 4% of power used. This would reduce the cost of mining.

Temperature

Temperature measured at the placement area

Temperature measured on its metal casing:

APW7 has a better heat dissipation, which means APW7 can work in higher temperature environment.

APW7 (3)
APW7 (2)
APW7 (6)
APW7 (1)

Product detail pictures:

Related Product Guide:

We normally think and practice corresponding towards the change of circumstance, and grow up. We aim at the achievement of a richer mind and body plus the living for Factory Supply Crypto Mining Simulator - New Bitmain Miner PSU APW7 Antminer APW7 – KaLe, The product will supply to all over the world, such as: Borussia Dortmund, Dominica, Czech republic, After years' creating and developing, with the advantages of trained qualified talents and rich marketing experience, outstanding achievements were gradually made. We get good reputation from the customers due to our good solutions quality and fine after-sale service. We sincerely wish to create a more prosperous and flourishing future together with all the friends home and abroad!

asic a10 pro

Asic S9

Binance Mining

Bitmain E3

crypto mining simulator

cryptocurrency mining

Superb technology, perfect after-sales service and efficient work efficiency, we think this is our best choice.

By Doris from Poland - 2018.06.09 12:42

This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.

By mary rash from Israel - 2018.11.28 16:25