China wholesale Goldshell Mini Doge - Goldshell Lt5 2.05G DOGE LTC Asic Miner – KaLe

Algorythm of GoldShell LT5 Miner

One of the biggest advantages of using the Scrypt algorithm is the speed of transactions. Scrypt algorithm is best known for confirming Crypto transactions quickly. The reason for this is that the algorithm was designed to utilize high-speed memory.
This algorithm can generate enough Crypto that can handle bulk transactions. It’s safe since the speed allows users to get the protection they need from the 51 percent attack.

Efficiency of the LT5 Goldshell Miner

The manufacturer does not offer an exact efficiency level of the LT5 miner. We believe that the efficiency is around 2.05G/2080W. The efficiency is high enough to give users a profitable mining experience. High efficiency is brought about by the high power consumption of 2080W.
It’s one of the few Dogecoin and Litecoin miners to surpass the 2000W mark. And this translates to miners enjoying a profitable outcome thanks to the power it brings to the table.

Hash Rate of Goldshell LT5 Dogecoin and Litecoin Miner

With a hash rate of 2.05 GH/s, this is one of the highest hash rates in the Scrypt algorithm. The manufacturer wants to have a miner that has a high hash rate for better performance. And this is made possible thanks to the power consumption of 2080W.
These two must go hand-in-hand for optimum performance. Goldshell wants to be on the leader’s board when it comes to mining Dogecoin and Litecoin.

Warranty period: After-sales maintenance service period starts from the date of delivery, Glodshell will provide free after-sales service within 180 natural days.

Goldshell LT5 evaluation

The case is still the classic aluminum alloy integrated design, which is simple and atmospheric. It is worth mentioning that Goldshell LT5 has only two fans. After discussing with engineers, we learned that due to the mature technology of Goldshell mining machine, this mining machine adopts the most optimized solution for heat dissipation—dual fan design.

The power supply model information is marked on the side of the case. The functional areas on the front of the case are from left to right: IP reporting button, Ethernet interface, SD card slot, reset button and status indicator

After removing the top, you can clearly see the main control board and the four hash boards distributed side by side. There are actually 128 chips distributed on a single computing power board, and the whole machine has a total of 512 chips. This cost is really visible to the naked eye. In addition, due to the large number of chips, the heat sink adopts an independent fish scale design with a narrow front and a wide rear, which not only improves the ventilation rate and heat dissipation performance of the case, but also reduces the weight of the whole machine. In the middle of the front of the case, you can see the metal card slot for strengthening the hash board. Goldshell has always been good at taking care of the details.

After plugging in the power supply, you need to configure the mining pool. It should be noted that the mining pool needs to register an account, and you cannot use the address to mine directly. You can set it in the account setting option of the personal center. The miner settings can all use the default parameters.

After a period of operation, the 24-hour average computing power of the mining pool is 2.07GH/s, which is slightly higher than the official website parameters. The temperature of the air inlet and outlet, the air inlet is 25.5 degrees, which is approximately equal to the room temperature, and the temperature of the air outlet is only 42.4 degrees, which is lower than the temperature of the general four-fan design mining machine. During operation, the decibel value of the near-end noise is 76.5db, which belongs to the middle level. The actual operating power consumption is 2119W, which is slightly higher than the official website parameters. This is the first time that the power consumption is slightly higher than that marked on the official website among all Goldshell miners tested, but it is also within the normal floating percentage range.

After 24 hours of operation, the computing power of the LT5 machine is stable during operation. Compared with other models on the market, Goldshell LT5 is currently the machine with the highest computing power among Litecoin mining machines.